Moser T-CUT 1591T Manual De Instrucciones página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
Product description
Description of parts (Fig. 1)
A Blade set
B On/off switch
C Charging indicator
D Charging stand
E Charging stand socket
F Oil for blade set
G Cleaning brush
H Plug-in transformer
I
Appliance plug
Technical data
Hand-held appliance
Drive unit:
Battery:
Battery operating time:
Dimensions (LxWxH):
Weight:
Emission sound pressure level: max. 62 dB(A) @ 25 cm
Vibration:
Charging stand
Dimensions
with accessories (LxWxH):
Weight:
Plug-in transformer
Type
Power consumption:
Operating voltage:
The appliance is safety insulated and radio screened. It meets
the requirements of EU Electromagnetic Compatibility Directive
2004/108/EC and Machinery Directive 2006/42/EC.
Operation
Preparation
Keep the packaging material for safe storage or
transport later.
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Handle with care! Damage due to incorrect power
supply.
f Only operate the appliance with an alternating cur-
rent and with the voltage stated on the nameplate.
DC motor
NiMH battery
up to 60 minutes
141 x 32 x 29 mm
approx. 135 g
< 2.5 m/s
2
72 x 96 x 58 mm
approx. 61 g
Adapter 6000
max. 12 W
100 – 240 V / 50/60 Hz
Charging the battery
Before the appliance is used for the first time, it
should be charged for approx. 2 hours!
1. Connect the appliance plug (I) on the plug-in transformer to
the charging stand socket (E) (Fig. 2ⓐ).
Battery overcharging is prevented thanks to intelligent
charge management.
2. Connect the plug-in transformer to the mains socket
(Fig. 2ⓑ).
3. Switch off the appliance using the on/off switch (Fig. 3ⓑ).
4. Place the appliance on the charging station (Fig. 2)
·
During charging, the charging indicator (C) flashes
at evenly spaced intervals. When the battery is
fully charged, the charging indicator flashes at a
different rate (10 on / 1 off).
·
After the appliance has been removed from the
charging stand, the display goes out (power sav-
ing mode).
·
It takes no more than120 minutes for the appli-
ance to charge to full capacity.
Battery operation
1. Switch on the appliance using the on/off switch and switch
off after use (Fig. 3ⓐ/ⓑ).
·
With the battery fully charged, the appliance can
be operated for up to 60 minutes. This capacity
is attained after approx. 5 - 10 charging cycles.
·
In case of insufficient maintenance of the
blade set, the operating time can be reduced
considerably.
Maintenance
Cleaning and care
Danger! Electric shock due to penetration of
liquid.
f Switch off the appliance before any cleaning and
maintenance takes place.
f Do not immerse the appliance in water!
f Do not allow any liquid to get inside the appliance.
f Only place the appliance back on the charging
station if it is completely dry.
Handle with care! Danger from aggressive
chemicals.
Aggressive chemicals could damage the appliance
and accessories.
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil recom-
mended by the manufacturer.
ENGLISH
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
13

Publicidad

Tabla de contenido
loading

Tabla de contenido