Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety; Intended Use - Flex L 26-6 230 Instrucciones De Funcionamiento Originales

Contents
Symbols used in this manual . . . . . . . . . 14
Symbols on the power tool . . . . . . . . . . 14
For your safety . . . . . . . . . . . . . . . . . . . 14
Noise and vibration . . . . . . . . . . . . . . . . 17
Technical specifications . . . . . . . . . . . . 18
Overview . . . . . . . . . . . . . . . . . . . . . . . . 19
Instructions for use . . . . . . . . . . . . . . . . 20
Maintenance and care . . . . . . . . . . . . . . 22
Disposal information . . . . . . . . . . . . . . . 23
-Declaration of Conformity . . . . . . . . 23
Exemption from liability . . . . . . . . . . . . . 23

Symbols used in this manual

WARNING!
Denotes impending danger. Non-
observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Protection class II
(completely insulated)
Disposal information for the old
machine (see page 23)
14

For your safety

WARNING!
Before using the angle grinder, please read
and follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the
-
regulations for the prevention of
accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The angle
grinder may be operated only if it is
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.

Intended use

This angle grinder
- for commercial use in industry and trade,
- is designed for dry grinding and cutting
metal and stone; a special cutting guard
must be used for cutting,
- for surface grinding with sanding sheets
on a backing pad which has been
designed to operate at the speed of the
machine,
- for use with grinding tools and acces-
sories which are indicated in these
instructions or recommended by the
manufacturer.
Not permitted are e.g. chain cutting wheels,
saw blades.
L 26-6 230