Installing Windows - ASROCK 970 Pro3 R2.0 Manual De Instrucciones

2.8

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical

drive first. Then, the drivers compatible to your system can be auto-detected and

listed on the support CD driver page. Please follow the order from up to bottom side

to install those required drivers. Therefore, the drivers you install can work properly.

2.9 Installing Windows

Vista

64-bit / XP / XP 64-bit With RAID Functions

If you want to install Windows

/ XP 64-bit on your SATA3 HDDs with RAID functions, please refer to the document

at the following path in the Support CD for detailed procedures:

..\ RAID Installation Guide

2.10 Installing Windows

Vista

64-bit / XP / XP 64-bit Without RAID Functions

If you want to install Windows

/ XP 64-bit OS on your SATA3 HDDs without RAID functions, please follow below

procedures according to the OS you install.

2.10.1 Installing Windows

Functions

If you want to install Windows

functions, please follow below steps.

Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)

STEP 1: Set up UEFI.

A. Enter UEFI SETUP UTILITY

B. Set the "SATA Mode" option to [IDE].

STEP 2: Install Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista

XP / XP 64-bit Without RAID

XP / XP 64-bit on your SATA3 HDDs without RAID

Advanced screen

XP / XP 64-bit OS on your system.

ASRock 970 Pro3 R2.0 Motherboard

/ Vista

64-bit / XP

/ Vista

64-bit / XP

Storage Configuration.

Tabla de Contenido