Rockwell RK5132K Manual Del Usario página 9

OSCILLATING TOOL
APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and application.
The workpiece must be clamped tightly before it is cut.
Universal Fit accessories available from Rockwell
TM
Accessories work with other competitive tools.
Sawing
Sanding
Rasping
Removing
grout
Scraping
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw blade,
rotate it and retighten firmly.
Cut/Sand with a constant movement and light pressure.
Heavy pressure does not increase the cut/removal rate – the accessory merely wears faster.
Pic
Bi-Metal Metal/Wood End Cut
Blade
Standard Wood End Cut Blade
Precision Wood Cut Blade
HSS Semicircle Saw Blade
Sanding Pad (Perforated)
Sanding Finger Pad
Triangular Carbide Grit Rasp
Carbide Rasp (Finger Shaped)
Carbide Grit Semicircle Saw
Blade
Diamond-Coated Semicircle
Saw Blade
Rigid Scraper Blade
Flexible Scraper Blade
Name
Wood, plastic, fiberglass, nails, non-ferrous
metals, thin sheet metal, hardened fillers.
Wood, plastic, drywall.
Wood, soft plastics.
Thin wood, plastic, fiberglass,
non-ferrous metals, thin sheet metal,
hardened fillers, window glazing.
Wood, plastic, hardened fillers.
Wood, plastic, hardened fillers.
Wood, hardened adhesives, thin set,
masonry.
Wood, hardened adhesives, thin set,
masonry.
Grout, porous concrete, masonry.
Ceramic and stone tile, backerboard.
Old paint, hardened adhesives, caulk, carpet.
Elastic sealants, paint, adhesive residues,
carpet.
ENG
Application
9