Kawai MP11SE Manual De Usuario página 130

Implementación MIDI
1.1 Channel Voice Message
RPN MSB/LSB
Status
BnH
BnH
n=MIDI channel number
mm=MSB of the NRPN parameter number
ll=LSB of the NRPN parameter number
NRPN numbers implemented in MP11SE are as follows
NRPN # Data
MSB LSB
01H 08H
01H 09H
01H 0aH
01H 20H
01H 21H
01H 63H
01H 64H
01H 66H
RPN MSB/LSB
Status
BnH
BnH
n=MIDI channel number
mm=MSB of the RPN parameter number
ll=LSB of the RPN parameter number
RPN number implemented in MP11SE are the followings
RPN # Data
MSB LSB
00H 00H
00H 01H
7fH 7fH
Program Change
Status
CnH
n=MIDI channel number
pp=Program number
Pitch Bend Change
Status
EnH
n=MIDI channel number
mm,ll=Pitch bend value
130
(cont.)
2nd Byte 3rd Byte
63H mmH
62H llH
:0H-fH(ch.1 ~ ch.16)
MSB Function & Range
mmH Vibrato Rate mm :00H - 7FH(-64 ~ 0 ~ +63)
mmH Vibrato Depth mm :00H - 7FH(-64 ~ 0 ~ +63)
mmH Vibrato Delay mm :00H - 7FH(-64 ~ 0 ~ +63)
mmH Cutoff mm :00H - 7FH(-64 ~ 0 ~ +63)
mmH Resonance mm :00H - 7FH(-64 ~ 0 ~ +63)
mmH Attack time mm :00H - 7FH(-64 ~ 0 ~ +63)
mmH Decay time mm :00H - 7FH(-64 ~ 0 ~ +63)
mmH Release time mm :00H - 7FH(-64 ~ 0 ~ +63)
* Ignoring the LSB of data Entry
* It is not affected in case of modifying cutoff if tone does not use the DCF.
2nd Byte 3rd Byte
65H mmH
64H llH
:0H-fH(ch.1 ~ ch.16)
MSB LSB Function & Range
mmH llH Pitch bend sensitivity
mm :00H-0cH (0~12 [half tone]),ll:00H
mmH llH Master fine tuning
mm,ll :20 00H - 40 00H - 60 00H (-8192x50/8192 ~ 0 ~ +8192x50/8192 [cent])
-- -- RPN NULL
2nd Byte
ppH
:0H-fH(ch.1 ~ ch.16)
:00H - 7fH(0 ~- 127)
2nd Byte 3rd Byte
llH mmH
:0H-fH(ch.1 ~ ch.16)
:00 00-7f 7fH(-8192~0~+8192)
Default = 40H
Default = 40H
Default = 40H
Default = 40H
Default = 40H
Default = 40H
Default = 40H
Default = 40H
Default=02H
Default = 00H
Default = 40 00H