LifeWave BST Manual Del Usuario página 21

0101010101100011100110101010111000101010111000010101101010101
1100001010110101010110101
portable and mobile RF communications equipment and the LifeWave BST
The LifeWave BST is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the LifeWave BST can help prevent
0101010101100011100110101010111000101010111000010101101
electromagnetic interference by maintaining a minimum distance between portable and mobile
01
RF communications equipment (transmitters) and the LifeWave BST as recommended below,
100001010110101010110101
according to the maximum output power of the communications equipment.
101010110101
Rated maximum
output power of
transmitter
01010101011000111001101010101110001010101110000101011 Watts [W]
01010110101010110101
00010101011100001010110101010110101
1010101100011100110101010111000101010111000010101101010101101
01010101011000111001101010101110001010101110000101011010
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2; These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects, and people.
010101010110001110011010101011100010101011
Recommended separation distances between
010101010110001110011010101011100010101011100
Separation distance according to frequency of transmitter
150kHz to
80MHz
d = 1.17√P
0.01 0.12
0.1 0.37
1 1.17
10 3.7
100 11.7
© All Right Reserved, LifeWave Ltd. 2010
Table 6
Meters [m]
80MHz to
800MHz
d = 1.17√P
0.12
0.37
1.17
3.7
11.7
800MHz to 2.5GHz
d= 2.34√P
0.24
0.74
2.34
7.4
23.4
149