Beta Max Beta Lite Manual Del Usuario página 56

B e t a M a x P o r t a b l e H o i s t s O p e r a t i n g a n d M a i n t e n a n c e P r o c e d u r e s M a n u a l
S p e c i f i c a t i o n s
Model
Leo XXL 80 fpm (with
Standard Controller
and Single Rope)
40 fpm (with
Standard Controller
and Double Rope)
Variable Speeds and
Soft Start/Stop with
Variable Frequency
Drive Controller
NOTE: All models use an extendable pendant controller, except the Leo XXL, which
has an extendable pendant with two speeds and Emergency Stop
NOTE: Beta Max requires a 50 percent duty cycle for portable hoists. This means the
hoist should be in continuous operation for only 20 minutes out of every 40 minutes.
WARNING
Always replace wire rope with the same diameter and strength specifications of the original wire
rope supplied with the hoist. Never replace wire rope with any different specifications without first
contacting and consulting the dealer or Beta Max, Inc. If wire rope specifications are not known,
contact Beta Max, Inc. with the proper model and serial number to verify correct wire rope
specifications for the intended application and model.
4-4
Table 4.2 Hoist Specifications by Model
Voltage and Amperage
Lifting Speed
Standard Controller
220V AC
Three-phase - 15 Amps
Variable Frequency
Drive Controller
220V AC
Single-phase - 12 Amps
Unit Weight
Requirements
175 pounds
(79.4 kg)
Shipping
Weight
210 pounds
(95.3 kg)
www.betamaxhoist.com
1-800-233-5112