Trestle Monorail Mounting - Beta Max Beta Lite Manual Del Usuario

Trestle Monorail Mounting

Mounting Site Preparation
The Trestle Monorail is a universal mounting option system for all Beta Max
portable hoists and is ideal for mounting on a flat roof or an intermediate floor. The
system allows a 3.5-foot (1.1-meter) cantilever. Two people can assemble the
system in minutes. An area of approximately 10 feet x 15 feet (3.1 meters x 4.6
meters) is needed to properly assemble the unit. The preferred method is to
assemble the system at the same location of intended installation. An alternative
method is to put the system together in one place and transport the assembled unit
to the installation area. The Trestle Monorail is available in two different capacity
versions, 1200 pound (544 kg) capacity or 2000 pound (907 kg) capacity.
The foundation under the Trestle Monorail must be adequate to support the total
weight. Load-spreading planks must be placed under the Trestle Monorail if the
combined weight for the ballast, payload, trestle, and hoist exceeds the unit
loading capacity of the floor. Use tie-back cables on all methods of anchoring.
Always tie back the rear arches of the Trestle Monorail.
www.betamaxhoist.com
1-800-233-5112
5-23