Instrument Components; Touchscreen; Ethernet Port - LongGene A200 Manual Del Usuario

2.
nstrument Components

Touchscreen

Air Vent
Power Switch
Power Inlet
Table 1 Function of the Thermal Cycler Components
Component Function
Lid Heats the top surface of reaction vessels to prevent reaction sample evaporation and condensation.
Lid Knob Regulates the height and force of lid.
Lid Handle Opens and closes the lid.
USB – A Port Connects to a USB flash drive.
Touchscreen Views and controls the instrument.
Air Vents Let air go into and go out of the instrument.
USB – B Port Connects the Thermal Cycler to a computer.

Ethernet Port

Network control multiple Thermal Cyclers by a computer.
Power Switch Powers on (1) and powers off (0) the instrument.
Power Inlet Connects the instrument to a socket via supplied power cable.
Figure 1 Front View of the Thermal Cycler
Figure 2 Rear View of the Thermal Cycler
40
I
Lid Knob
Lid
Lid Handle
USB –A Port
Air Vent
USB - B Port
Ethernet Port