Exchange Between Constant Step And Gradient Step - LongGene A200 Manual Del Usuario

• If you touch Pause, the program will automatically pause as soon as the desired
4. Touch Ok to accept changes and close the window.
To remove the dTemp, dTemp, Ramp Rate and Pause,
1.1 In the Step Options window, click on the dTemp, dTemp or Ramp Rate text
1.2 Uncheck the Pause check box.

1.6 Exchange between Constant Step and Gradient Step

Gradient Temperature Step is only available with reference ZFD002 Gradient
Type Thermal Cycler.
To change a constant step to a gradient step:
1. In the Edit Program screen, selects a constant temperature step. Touch Options
2. Click the Gradient check box to enable.
step temperature is reached and the instrument will beep twice. Touch Resume
will continue the program running. Pause can be used to add reagents (i.e. hot
start) or when adding or removing tubes during a step.
Note:
You can also add Pause or dTime as you need to a gradient temperature step.
box. Delete the old value in the pop-up keyboard or enter "0" and then touch
Ok.
to open the Step Options window.
The right part of the window will display calculated temperature gradient from
the first column to the last column (from the 1
block module). Change the Left and Right temperature as you need.
st
to 12
54
th
for the 96 wells sample