Reset System; Cycler Name; Configure Network Connection - LongGene A200 Manual Del Usuario

Use this function to reset system to factory settings
8.2 Reset
System
The cycler name is used for identifying different thermal cyclers when multiple
instruments are controlled via network by a computer. By default the cycler
name is set to the instrument serial number. You can change it as need.
8.3 Cycler
1. In the Admin Menu screen, touch Cycler Name.
Name
2. In the Cycler Name screen, set a unique Thermal Cycler Name. The name can
3. Select 'Allow remote control' to make the instrument can be controlled via
4. When you finish, touch
8.4 Configure
If your want to control the Thermal Cycler via network, you need to configure
Network
network connection. You can view IP address (wired connection) and set Wi-Fi
(wireless connection).
Connection
8.4.1 To view IP address:
1. In the Network screen, touch IP Set.
be up to 15 characters.
network.
√(Save)
to return to the Admin Menu screen.
67