General Safety Recommendations - Magniflex MagniSmartech Manual De Uso Y Mantenimiento

The Smartech© system is meant to be used in the following configuration and operating conditions:
"Magni Smartech©" version (complete system) with a motorized slatted bed frame, motor control & anti-snoring
functions, and a vital signs acquisition system and chromotherapy.
Other types of use are not compatible with the specific characteristics of the product.

1.3 GeNeraL saFeTY reCOmmeNDaTIONs

It is absolutely forbidden for unauthorized personnel to perform any operation whatsoever.
Never bypass the protective devices, which are designed to protect the safety of the user.
Routine and special maintenance tasks must be performed while the product is not operating and without power
supplied to the system. Any repairs of the electrical systems must be carried out with the power off.
Do not put hands or other foreign objects on moving parts, let alone liquid containers near the electrical parts.
The user must avoid unsafe operations on the product that could compromise its balance. It is strictly prohibited to
remove or disengage the safety devices.
1.4 CONNeCTIONs
The main electrical supply should be adequate to withstand the maximum power consumption of the machine, as
indicated.
The electrical connection includes the introduction of the plug of the connection cable/s of the supplied transformer/s
into two 10 A power supply outlets (depending upon the electrical system in use ) located as close as possible to the
area of installation of the product.
1.5 earTHING sYsTem
The earthing and short circuit of the metal structures the product consists of is ensured through the power supply
through the low voltage transformer (the current flows toward the earthing lead-in wire of the user's electrical
system). The earthing connection must be also be performed for the low-voltage systems which are located in areas
that are usually wet and very humid (if the voltage exceeds 25 V to earth for alternate current and 50 V towards earth
for direct current).