Magniflex MagniSmartech Manual De Uso Y Mantenimiento página 49

4.3 eLeCTrICaL maINTeNaNCe
4.3.1 mODes OF aCTION
Inspection, testing and any maintenance tasks of the product's control and display units are to be performed in the
manner described below:
• Control and inspection of units/devices. The user must check that units/devices are working properly in the manner
described (see the task description provided below).
• Calibration maintenance or replacement of parts. In the event of a system failure or rupture of a control device, the
maintenance task must be carried out by the manufacturer's "Specialized personnel" only at the specific request of
the user.
4.3.2 rOUTINe eLeCTrICaL maINTeNaNCe
Before carrying out maintenance or a replacement of electrical or electronic equipment, cut off the power supply to
the machine.
5. tyPe OF PrOBLem: caUSeS - SOLUtiONS
The maintenance and inspection tasks to be performed on the machine are: Every month:
- Visual inspection of electrical components
- Visual inspection of the control pad functions and status of the connecting cables
- Visual inspection of the electric power cable
5.1 FOreWOrD
This section of the manual is intended to provide useful information for the troubleshooting problems most frequently
encountered when using the machine.