Boer Temper Koban KDP9 360 mini Manual Del Usuario página 24

KDP9
Mini presence detector
All knock-outs are used: Φ12.5mm (See FIG.14-D).
Put detectors two spring clips into the drilled hole, then insert detector
upwards (See FIG.15).
Φ=32
Signal cable
Spring clips
FIG.15
Feed cables through the ceiling and refer to wiring diagram (See FIG.5 -
FIG.9) to connect properly. Make sure signal cable through the ceiling and
insert into power box (See FIG.16).
Signal
cable of
detector
Detector
Instructions manual |
Section area for cable entry:
mm
12.5
Φ
FIG.14-D
FIG.16
24 www.grupotemper.com