Publicidad
Idiomas disponibles
Idiomas disponibles
The system pre-programmed with a routine of work with each button of the Transmitter. It works
with the following configuration:
Press button 1 once
Press button 1, then button
3 within 2 seconds
Press button 1, then button
2 within 2 seconds
Press button 2 once
Press button 4 for 3 seconds
Press button 1 for 1 second
Press button 3 for 3 seconds
Press buttons 1 and 2
together for 3 seconds
Press button 3, then button
1 within 2 seconds.
Press button 3, then button
2 within 2 seconds.
Press button 4, then button
3 for 3 seconds.
Press buttons 3 and 4
together for 2 seconds.
Alarm system armed.
The alarm system can be armed in 2 methods.
1. The first, using button I on the transmitter. It is necessary for the ignition switch to
be OFF and for the system not to be on Valet.
2. The second, using the automatic armed, which is obtained when the ignition switch
goes from ON to OFF and then open and close a door. The system will
automatically arm in 30 seconds after closing the last door, this functions is
programmable (see function programming chart).
Genius Car Alarm
a. Alarm is armed and the doors
are locked
b. Stop temporarily the alarm's
trigger
Arm the alarm cancelling the
shock sensor.
Arm the alarm cancelling the
shock sensor and the doors'
signal input
Disarm and unlock doors
Stop temporarily the alarm's
trigger.
Channel 2 (Open Trunk)
Car Finder.
Panic
Anti-hijacking
Silent Arming Mode
Silent Disarming Mode
Valet Mode
Arm Channel 3
www.geniuscaralarm.com
a. IGNITION IS
OFF
b.
SIREN
SOUNDING
IGNITION IS OFF
IGNITION IS OFF
ARMED
SIREN
SOUNDING
IGNITION IS OFF
ARMED
IGNITION IS OFF
IGNITION IS ON
IGNITION IS OFF
ARMED
IGNITION IS OFF
IGNITION IS
ON/OFF
29
Publicidad
