Publicidad
Idiomas disponibles
Idiomas disponibles
Triggered by Ignition ---------------------------The LED will flash once.
Triggered by Opened Door ---------------------The LED will flash 3 times.
Triggered by Shock Sensor----------------------The LED will flash 4 times.
FUNCTIONS PROGRAMMING
a. Turn the ignition key to ON position.
b. Within 10 seconds, press the valet switch 5 times.
c. The siren will chirp 3 times.
d. Press the valet switch the number of times of the selected function.
* The siren will sound every time the valet switch is pressed.
e. Press the button in the remote control of the selected option.
* If the button 1 is pressed, the siren will chirp once (1); if the button 2 is pressed, it
will chirp twice (2), and three chirps if button 3 is pressed.
f. To exit the programming mode, turn the ignition key to OFF position.
* The siren will sound a (1) long beep.
Times the
Valet
switch is
pressed
1
Lock closure with automatic arm
2
Door's Signal Activation Delay
3
Anti-hijacking by transmitter
4
Lock Doors with Ignition
5
Unlock Doors with Ignition
6
OUTPUTS FOR CHANNEL 3
7
Anti-hijacking Warning
*Indicates the beginning of the
sequence
8
ARMED and DISARMED Notices
9
Reminder to arm the alarm.
*Only in Manual Arming
10
Opened Door Warning
11
Channel 2
12
Anti-hijacking by Door
Genius Car Alarm
PROGRAMMING TABLE
FUNCTION
www.geniuscaralarm.com
Press
Press button 1
button 2
YES
WITHOUT
Delay of 30
DELAY
seconds
YES
YES
YES
Second Pulse to
CHANNEL 3
Unlock Doors
YES
YES
YES
YES
Electric Trunk
Dome Light
Close Door
Opend Door
Press
button 3
NO
Delay of 60
seconds
NO
NO
NO
HORN
OUTPUT
(-)
NO
NO
NO
NO
30 second
Electric
window
lifter
35
Publicidad
