Genius Car Alarm 3B Serie Manual Del Usuario página 34

b. The LED will light solid and the siren will chirp 5 times, confirming that the system is
in Valet mode.
c. If the system is in Valet mode: If we press BUTTON 1, the doors will be locked and
the lights will flash once if BUTTON 2 is pressed, the doors will be unlocked and the
lights will flash twice.
*The LED will turn off.
2. Valet by Reset Switch.
a. When the ignition key is in ON position, keep pressing reset switch until the siren
chirp 5 times.
b. The LED will light solid confirming that the system is in Valet mode.
c. To exit Valet mode, apply the previous mentioned procedure.
* The LED will turn off.
DOORS LOCK WITH IGNITION
The overall alarm system offers us a comfortable and secure operation, and this function is
one of them.
a. After the engine ignition is on, the doors will be locked 2 seconds later.
b. Once the engine is turned off, the doors will be unlocked immediately.
DOOR LOCKS' CONTROL WITH THE TRANSMITTER WHILE DRIVING
While driving, if we press button 1, the doors will be locked; and if we press button 2, the
doors will be unlocked.
FUNCTIONS' SELECTION - JUMPERS
Important: All the Jumper's selections have to be determined before installation.
JUMPER
J1: AUTOMATIC ARMING /
MANUAL ARMING
J2: DOOR LOCKS' TIME
J3: DOORS' POLARITY
(+ O -)
J4: ANTI-HIJACKING BY
IGNITION
INSTRUCTIONS
* LED'S CONDITIONS
a. Armed Alarm: The LED will flash slowly (once every second)
b. Automatic Arming and Re-arming: The LED will flash rapidly.
c. Valet Mode: LED will light solid.
* TRIGGER DIAGNOSIS – LED
Disarming the alarm after it was triggered will make the LED to flash, indicating us the
zone that triggered the alarm.
34
Genius Car Alarm
d. To exit Valet mode, apply the previous mentioned procedure.
MODE DEFAULT FABRIC
CONFIGURATION
AUTOMATIC ARMING
0.5 SECONDS
DOORS' INPUT (-)
ACTIVATED
(ON)
www.geniuscaralarm.com
MODE VARIANTS
MANUAL ARMING
DOUBLE PULSE
DOOR'S INPUT (+)
DEACTIVATED
(OFF)