Installing The Port Cover - Yamaha VXL1B-24 Guia De Instalacion

Installing the port cover

If you require waterproofing equivalent to that of the IP35, install the port
cover that is included with this product.
CAUTION
Use gloves or other protective wear when removing the grille, in order
to avoid cutting your hands on the grille edges.
1
Remove the four screws on the top and bottom
sides of the speaker, and remove the top and bot-
tom panels.
2
Use caution not to scratch the grille, and slowly
remove it from the speaker.
10
VXL1B-24/VXL1W-24/VXL1B-16/VXL1W-16/VXL1B-8/VXL1W-8 Installation Guide
3
Remove the four screws from the bass reflex port.
There are two bass reflex ports (top and bottom) on the VXL1-24/VXL1-
16.
4
Align the port cover and fasten it in place using
the screws that you removed.
0.8 N·m
0.8 N·m