MELICONI HP 200 Instrucciones De Uso página 15

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

GB
Meliconi's HP 200 wireless stereo headphones system uses a wireless audio transmission technology to listen to a qual-
ity stereo sound from a wide range of audio player devices up to a maximum distance of 100 metres without obstacles,
for complete freedom of movement. The signal can pass through walls and ceilings.
The transmitter may be connected to your TV and other analogue audio sources, such as DVD and Blue Ray players,
CD players, Hi-Fi systems, radios, PCs or notebooks.
The headphones are supplied with special rechargeable batteries already installed. Do not use any other type
of batteries. For replacement batteries contact the Meliconi technical support service.
This unit only accepts analogue electrical stereo audio signals e.g. those from standard headphone outputs, in input.
Therefore to connect it to a device with a different kind of audio output (digital – HDMI or optical digital – TOSLINK), an
appropriate converter/adapter will be required.
Do not use the device outdoors or in a humid environment nor expose it to water drops or sprays.
Do not install the device in an enclosed space and ensure there is adequate ventilation.
The AC power supply unit must be easily accessible to enable the electric separation of the device from the power
supply.
Disconnect the transmitter base from the electrical mains supply before performing the connections.
Do not tamper with the device – danger of electric shock. Any repair must be performed only by qualified personnel.
In the event of a fault with the AC power supply, disconnect it from the electrical socket immediately.
Do not expose the batteries or device to excessive heat, for example direct sunlight, fire or similar heat sources.
To avoid damage to hearing, do not use the headphones at loud volumes for long periods of time.
The symbol of bin with a cross over it on the appliance or the packaging indicates that the product
should be disposed of separately from other refuse at the end of its life cycle. The user must therefore
hand over the appliance at the end of its life cycle to an approved recycling centre for electrical and elec-
tronic refuse, or return it to the seller each time a new or replacement appliance is purchased. Correct
disposal in separated refuse collection for subsequent recycling, treatment and environmentally friendly
disposal contributes to reducing any negative impacts on the environment and human health, and en-
courages recycling of the materials used to manufacture the appliance. Illegal disposal of the product by
the user shall result in the application of sanctions provided for in applicable legislation (in Italy, article
50 and subsequent of Legislative Decree 22/1997).
WARNING: Do not attempt to remove the batteries or dispose of them in a fire. Do not dispose of them
in the environment. Improper use can damage the environment and human health. The bin symbol,
also shown on the battery, indicates that the battery must be disposed of according to applicable reg-
ulations (EC 2006/66): familiarise yourself with the disposal methods for used batteries applicable for
your country.
H P 2 0 0
Thank you for purchasing a Meliconi product!
Warnings
13

Publicidad

Tabla de contenido
loading

Tabla de contenido