Device Setup: Connecting With An Intranet; Device Setup: Connecting With Your Network - FLUXERGY 5506-CE Manual De Instrucciones

Device Setup: Connecting with an Intranet

1. Plug in your Analyzer's power supply to a standard outlet. Plug the other end into the back of
the Fluxergy Analyzer.
2. Plug in your router's power supply to a standard outlet. Plug the other end into the back of
the router.
3. Connect one ethernet cable to your computer. Plug the other end into one of the ethernet / LAN
1, 2, 3, or 4 ports. DO NOT PLUG INTO INTERNET / WAN.

Device Setup: Connecting with Your Network

1. Plug in your Analyzer's power supply to a standard outlet. Plug the other end into the back of the Fluxergy
Analyzer.
2. Connect an ethernet cable to the back of your Fluxergy Analyzer. Connect the other end of the ethernet cable
to your local network via the ethernet port.
3. Connect your computer to the same network as the Fluxergy Analyzer.
Instruction Manual (PN: 5780C04)
Version Date: May 5, 2021
9