Safety Precautions - FLUXERGY 5506-CE Manual De Instrucciones

Safety Precautions

The Fluxergy Analyzer contains no user-serviceable components. DO NOT disassemble.
•
Never attempt to repair or adjust the Analyzer yourself. Unauthorized disassembly and repair could
•
result in electrical hazards. Only a qualified Fluxergy technician can service the Analyzer. Contact
Fluxergy if the Analyzer fails to operate properly.
Call Fluxergy Customer Support for any service issues.
•
DO NOT stack other equipment or containers on top of the analyzer.
•
Keep analyzer away from sources of excessive heat or flames.
•
PROTECT your equipment from damp conditions or wet weather.
•
DO NOT spill water or other fluids on the analyzer.
•
DO NOT use any of the following liquids, abrasives, or aerosol sprays on or near the analyzer, as
•
they may damage the outer case and may influence the results:
Organic solvents
•
Ammonia-based cleaners
•
Sprays containing volatile liquids
•
Insecticides
•
Disinfectants (Outside of device can be gently wiped down with 70% isopropyl alcohol if
•
contaminated)
Air fresheners
•
The Power input supply for the Fluxergy Analyzer is 12VDC, 7A. Be sure to plug all equipment into
•
properly grounded electrical outlets.
Use only the power supply provided. Failure to do so may cause damage to the device and/or bodily
•
harm.
Disconnect the power cable from the AC power outlet:
•
If the power cable becomes frayed, split or otherwise damaged.
•
If anything is spilled onto the equipment.
•
If your equipment is exposed to excessive moisture.
•
If your equipment is dropped or the case has been damaged.
•
If you suspect that your analyzer needs service or repair.
•
Whenever you clean the case.
•
DO NOT use the equipment in a manner not approved by Fluxergy.
•
Clean the exterior of Analyzer before and after each use to prevent contamination and ensure
•
trouble-free operation. Use a soft lint-free cloth and 70% isopropanol solution.
4
Instruction Manual (PN: 5780C04)
Version Date: May 5, 2021