Chaumet MOVEMENT WATCH Manual De Instrucciones página 2

SELF-WINDING MECHANICAL
MOVEMENT WATCH
HOUR-MINUTE-SECOND-DATE FUNCTIONS
Your watch has a self-winding mechanical
movement. Each movement of your wrist moves an
oscillating weight that winds the spring to keep your
watch going. When fully wound, your watch has a full
power reserve. If not worn, its power reserve runs
down and it will stop.
Position 1: normal position and manual
movement winding
With the crown pushed against the case in
position 1, you can wind your watch manually by
rapidly rotating the crown clockwise.
Position 2: adjusting the date
To adjust the date, pull the crown one notch into
position 2 and turn it anti-clockwise until the desired
date appears. Push the crown back to position 1.
Do not adjust the date between 8.00 pm and
4.00 am, otherwise you risk damaging the
mechanism.
Position 3: setting the time
To set the correct time, pull the crown out
two notches to position 3 (maximum) and turn the
hands clockwise to the desired setting.
After use, make sure you always push the crown
back against the case to position 1.