Other Functions - AEG UltraMix KM4 Serie Libro De Instrucciones

5
Tilting the Motor head down: Move the Tilt head locking lever to "Unlocked" with one hand, tilt the Motor head
down with the other hand. Insert the plug in the main socket.
6
Move the Speed selector from "OFF" to desired speed (1-10). Once mixing is complete, turn the Speed selector to
"OFF" and unplug the appliance.
7
Work light and Power indicator light: If the appliance is plugged in and a speed is selected, a blue LED lights up
around the Speed selector. A working light will also light up over the working area. If the Speed selector is moved to
8
Note: If the Speed selector is already turned on before the appliance is plugged in, both the blue Speed selector LED

OTHER FUNCTIONS

9
How to use the coated SoftEdgeBeater™ * tool:
The SoftEdgeBeater™ is perfect for creamy mixtures and toppings.
The silicone edges of the beater, gently wipes the sides on the bowl helping to incorporate all the ingredients in the
mixture and to ensure even consistency throughout the mixing process.
10
Note: Do not use the coated SoftEdgeBeater™ * with heavy mixtures such as dough, use the dough hook tool
11
How to use the PerfectRiseLid™ *:
The PerfectRiseLid™ isolates and helps to build up the humid environment for the dough to rise in proper condition.
Covering the bowl with the PerfectRiseLid™ keeps the dough from drying out, preventing the formation of a crust on
the surface of the dough, which inhibits the proper rising of the dough which results in a poorer baking result.
12
Attachment hub: The appliance comes with a built in multipurpose Attachment hub. Read and carefully follow the
instructions that comes with each attachment for correct and safe use.
13
How to use splash guard:
• Do not overfill the machine to avoid spillover and motor overloaded.
• Use the splash guard to protect against liquid / light mixtures. Ingredients can be added directly to the bowl via the
feed hole of splash guard.
• For heavy dough mixtures (e.g. bread), it's not suggested to use splash guard. While mixing dough, in order to avoid
flour splash, keep the appliance at setting 1 for 60 seconds, then turn to recommended speed.
14
Adjusting the Attachment shaft: The appliance is adjusted at the factory so that the Flat Beater clears the bottom
of the Bowl. If the Flat Beater hits the bottom of the Bowl or is too far away from the sides, you can adjust it correctly.
See 14 for further instructions.
15
Turn the Speed selector to "OFF" and unplug the appliance. Tilt the Motor head back. Use a slotted point Head
screwdriver to adjust the screw. Turn counter clockwise to raise the Attachment shaft, turn clockwise to lower it.
HOW TO USE THE MEAT GRINDER*
16
Insert the grind screw (B) into the grinder housing (A). Place the knife (C) over the square shaft at the end of the
grind screw. Place the grinding plate (D) (medium or coarse) over the knife. Tighten the ring (E) by hand until the
meat grinder is secured.
Note:
17
Open the Attachment hub lid on the Stand mixer. Fit the Power shaft of the attachment in the Attachment hub
socket on the Stand mixer. Rotate the attachment back and forth if necessary. Tighten the Attachment hub knob until
the attachment is fully fastened.
Caution:
18
Place the food tray over the grinder housing. Cut raw meat into small pieces and place it on the food tray. Plug in
the appliance and turn the speed selector to desired speed (recommended speed: 6-8). Feed the meat into the feed
chute by using the pusher.
Caution:
Note:
HOW TO USE THE SLICER/SHREDDER*
19
How to use the Slicer/Shredder: Choose a Slicer or a Shredder knife (Medium or Course). Insert the shaft (square
www.aeg.com
KM4XXX_KM55XX_Assistent_StandMixer_AEG.indd 7
GB
DE
AR
BG
ES
FR
GR
NL
PT
7