Connections; Ac Cord Connection And Fi Xing, Cable Fi Xing - Panasonic TH-50LFB70E Manual De Instrucciones

Connections

AC cord connection and fi xing, cable fi xing
When using the Wall-hanging bracket (vertical) (for 50 inch model)
Note:
When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes
clamper is used on the hole
50 inch model
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.
If you need more clampers, purchase them from your dealer. (Available from the customer service)
Attach the clamper
1
hole
Insert the clamper
in a hole.
How to use the Ferrite core
PC with DVI-D
video out
Stereo mini plug (M3)
Less than
5 cm
DVI-video cable (Within 5 m)
10
All manuals and user guides at all-guides.com
AC cord fi xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
, the cables may be caught by the wall-hanging bracket.
65 inch model
To remove from the unit:
2
snaps
Keep pushing
both side
snaps
Shared with PC IN.
Less than
Ferrite core
5 cm
(supplied)
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
and
Bundle the cables
To loosen:
Set the
tip in the knob
hooks
hooks
Installing the Ferrite core
1 .
Pull back the tabs
(in two places)
3.
Route the cable
through and close
to secure the cables. If the
Keep
pushing
the knob
2.
Open the
Ferrite core
4.
Fix the Ferrite core
with the cable tie