Basic Controls - Panasonic TH-50LFB70E Manual De Instrucciones

Basic Controls

Main Unit
Touch panel IR transmission part
Installed on the four sides of the display panel.
ENTER/
+
/
VOL
-
/
MENU
INPUT
14
All manuals and user guides at all-guides.com
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will still
• Standby ........ Red
• Power-ON ...... Green
• HDMI1 Power management
HDMI2 Power management
......................... Orange (With HDMI1 or HDMI2 input signal.)
* These functions are not supported by TH-50LFB70E and TH-65LFB70E.
• PC Power management (DPMS)
......................... Orange (With PC input signal.)
• DVI-D Power management
......................... Orange (With DVI input signal.)
Note:
Remote control
If the power indicator is orange, power consumption during standby
sensor
is generally larger than that of when the power indicator is red.
Brightness Sensor
Detects the brightness in the viewing environment.
Enter / Aspect button
Volume Adjustment
Volume Up "+" Down "–"
When the menu screen is displayed:
"+" : press to move the cursor up
"–" : press to move the cursor down
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen will switch.
INPUT button (INPUT signal selection)
Main Power On / Off Switch
consume some power as long as the power
cord is still inserted into the wall outlet.)
Orange (When "Slot power" is set to "On"
and Terminal Board is installed.)
Orange (Depending on the type of the function board
installed, when the power is supplied to the slot)
Orange (When "Control I/F Select" is set to "DIGITAL
LINK/LAN" or "Wireless Network Standby" is set to "On".
Refer to "Operating Instructions, Network Operations")
Orange (When "Quick Launch" is set to "On".)
USB (VIEWER): Connect to USB memory.
USB (TOUCH): When using the "WhiteBoard
Software" from the supplied CD-ROM,
connect the computer via USB cable.
SLOT: Terminal board (optional accessories) insert
slot (see page 3)
Note:
The right side slot is for terminal board with 2-slot
width. The terminal board with 1-slot width does not
function when installed in the right side slot.