Preparing The Machine For First Use; Programming Your Machine - Krups ESPRESSERIA AUTOMATIC Manual Del Usuario

All manuals and user guides at all-guides.com
FALC DISP USA - 7220.qxp
Pull out and fill the
water tank with fresh
water.
Do not fill the water tank with hot water, mineral water, milk or any other liquid. If you turn on the machine when
the water tank is not in place or not correctly filled (under the "min." level,), the "fill water tank" light will come on.
This machine will not operate when the tank is empty.
NEVER PUT GROUND COFFEE IN THE COFFEE CONTAINER.
We do not recommend the use of oily or sugar coated or flavoured espresso/coffee beans.
These types of beans may damage the machine.
Check that the coffee beans do not contain any foreign particles, as any damage caused by the presence of
foreign particles will void the warranty.
Do not put water into the coffee bean container.
Remember to fit the drip tray to avoid waste water flowing onto the work surface and staining it or scalding you.
Be sure that the drip tray is properly installed to avoid overflow.
Be sure your water tank is clean.
When you first use your machine, it will ask you to set several parameters. If you disconnect your machine, you will again be
asked for some of these parameters.
Select (rotate)
Use the selector knob to choose a function and increase
or reduce values. Confirm your choice using the OK key.
The machine will ask you to set:
Language
Volume unit
Date
Time
Auto-off
Auto-on
Water hardness
Water filter
When using for the first time, the appliance may request "filling the machine". Follow the dis-
played instructions.
4/12/07 18:49 Page 7

PREPARING THE MACHINE FOR FIRST USE

Replace the tank, press Open the coffee bean
firmly to insure it's fitted container lid. Add fresh
properly. Close the lid. coffee or espresso beans.

PROGRAMMING YOUR MACHINE

Confirm (push)
Press "On / Off" to turn
your machine on. Follow
the instructions that
appear on the "choice of
language" screen.
You can select your chosen language from those offered.
Choose either ml or oz as your measurement unit.
You can set the date (mandatory if you use the Claris - Aqua Filter
System cartridge).
You can choose between 12 hour or 24 hour time display.
You can choose the period after which your machine will stop
automatically, from 30 minutes to 4 hours (by 30 minute increments).
You can automatically start pre-heating of your machine at your
chosen time.
You must set your water hardness between 0 and 4. See "Water
Hardness Measurement" section.
You must indicate whether a filter has been installed or not
(Claris - Aqua Filter System cartridge).
7
Close the coffee bean
container lid again.
Use the selector knob
to choose a language
(highlighted). Press the
OK key to validate.