Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
Power indicator is
blinking
Iron is not heating
Iron will not steam
Iron is leaking
Iron leaves spots/
flakes on clothing
Wrinkles are not
sufficiently removed
Fabrics are getting
an unwanted "shine"
GCSTCW-317_GCSTCB-200_19ESM2 (LA).indd 7
Trouble Shooting
CAUSE/SOLUTION
• The light blinks to indicate that the iron auto-off function
has been activated
•
Press it to restart
•
To stop blinking and reset, move the iron back and forth
and allow to re-heat for 2 minutes
•
Ensure the iron is on and power light is illuminated
•
Verify unit is plugged in
•
Adjust Fabric Select Setting to the correct setting for your
garments
•
Ensure water tank level is at least ¼ full
•
Ensure steam lever is switched on
•
Press Shot of Steam
• Only fill with water to the MAX level
•
Allow to heat for at least 2 minutes before use
•
Shot of Steam
has been pressed too frequently. Only use
®
shot of steam
in 3 second intervals or less
®
•
Shot of Steam
feature used with incorrect fabric setting.
®
Only use with Wool, Cotton or Linen settings
•
Empty water tank after each use and turn steam lever off
•
Empty water tank completely after each use
•
Clean soleplate when cool with a wet, damp cloth
• Use self-cleaning feature once a month
• Refer to the Anti-Calcium System section (select models
only)
• Ensure water cup used to fill the iron is clean
•
Check that the temperature select is set to the correct
fabric setting
•
Use Shot of Steam
®
stubborn wrinkles
•
Use an ironing cloth or a 100% white cotton fabric and
place it between the garment being ironed and the iron to
prevent "shine"
English - 7
button several times to prime
®
or Spray Mist features to help remove
9/11/19 08:52
Publicidad
Tabla de contenido
