Battery Charging; Connecting The Air Hose - Mangar Airflo Plus Instrucciones De Uso Y Garantía

Airflo Plus
Battery Charging - fig. 3
The Airflo Plus is fitted with a quick release battery
pack. The batteries can either be re-charged whilst
in the Airflo Plus or easily removed and re-charged
in the optional charging cradle.
• Fit the appropriate mains plug adaptor to the
battery charger (A).
• Plug the battery charger into a mains outlet
socket and connect the charger output lead
(B) to the Airflo Plus charging socket (C).
• The battery status indicator light (D) will flash
green while the battery is charging and then
turn to a steady (non flashing) light when the
Airflo Plus is ready for use.
NOTE: The charger is not capable of providing
sufficient power to charge the batteries while the
compressor is running.
To maintain battery condition, It is recommended
that the Airflo Plus is left continuously on charge
when not in use. The batteries cannot be
overcharged using this charger.
WARNING: DO NOT recharge the batteries in a
bathroom or in a damp environment.
Unplug the charger from the mains power socket
to disconnect the charger from the mains power
supply.
Connecting the Air Hose - fig. 4
Disconnect the Airflo Plus from the battery charger
and place the Airflo Plus in a safe and convenient
position.
Connect the air hose from the Mangar International
equipment to the air outlet socket (A). The connector
will 'click' into place when firmly pushed onto the
outlet. To release the hose, press the paddle down
on the connector (B).
4
All manuals and user guides at all-guides.com
B
3
4
MI0323 issue 3
A
C
D
B
A