Trouble Shooting Guide; Specifications - Mangar Airflo Plus Instrucciones De Uso Y Garantía

MI0323 issue 3
Compressor does not run when the 4 way
hand control buttons are pressed.
Ensure that the 'Auto Function' has been
selected.
Check that there are no kinks in the air
hose.
Compressor keeps stopping when trying to
inflate the lifting aid.
Check that there are no kinks in the air
hose.
Airflo Plus
Weight:
Output pressure:
Batteries:
Battery Life:
Lifting performance (from full battery):
Environmental protection: IP51 (
Type BF equipment
This equipment has been tested and meets the requirements of current EMC legislation
Charger: Model number - CA0362
nput:
I
Output:
Double insulated Class II equipment
freedom through lightweight solutions
All manuals and user guides at all-guides.com

Trouble shooting guide

Specifications

5.7Kg (12½ lbs)
0.35 bar (5 psi)
2 x 12v - 2.3Ah (
Maintenance free Valve Regulated Sealed Lead Acid
Approx 1000 charging cycles (
ELK - 3 lifts
Camel - 2 lifts
Protection against large dust deposits & vertical falling drops of water
AC 100v - 230v, 50-60Hz, 0.3A
DC 30v, 350mA
Battery State Indicator light flashing 'Red'.
This happens when the compressor's internal
temperature cut-out has tripped. Leave the
Airflo Plus for 60-90 minutes to cool.
Battery State Indicator light flashing 'Red/
Green'.
This happens when the current overload
cut-out has tripped. Leave for 3 seconds to
self reset.
Compressor causes electrical interference
with another piece of electrical equipment.
Move either the compressor or other item
further away from each other until the
interference stops.
2 - 5yrs Depending on usage
Airflo Plus
)
)
)
7