Auto' Function; 4-Way Hand Control - Mangar Airflo Plus Instrucciones De Uso Y Garantía

MI0323 issue 3
A
A
freedom through lightweight solutions
All manuals and user guides at all-guides.com
'Auto' Function - fig. 5
The 'Auto' function is designed for use with the
pneumatic 4-Way hand control - fig.
To switch on, press and hold the 'Power' button
(A) until the light (B) comes on. The light will stay
on while the 'Auto' function is selected.
Momentarily press the 'Power' button to cancel the
'Auto' function. The battery status indicator light
will go out after approximately 5 minutes.
When in 'Auto' mode, the internal microprocessor
carries out a battery voltage check each time air
is required and if the voltage becomes too low,
B
the 'Auto' function will be cancelled automatically.
Turn the 'Auto' function off after use.
5
C
4-Way Hand Control - fig. 6
•
•
•
•
A
B
6
Connect the four hoses (A) from the 4-Way
Hand Control to the corresponding numbered
and coloured connectors on the Mangar
International product.
Connect the hose (B) from the Hand Control
to the Airflo Plus air outlet socket (C).
Press and hold the 'Power' button until the light
comes on.
Pressing any of the numbered buttons will
deliver air to the corresponding numbered
hose (follow the user instructions for the
Mangar International product that is to be
inflated).
Airflo Plus
6
5