VETEC CP700G Manual De Instrucciones página 25

CP700G
8. Technical properties and functions
e body of the pump and all components are made of tested high resistance materials.
■
e casing is entirely made of insulating, shock resistant polyamide, reinforced with
■
fibreglass.
e equipment has a light, compact and robust structure.
■
e range of the operating temperature is between –20° C and +50°C
■
e maximum operating pressure of the pump and power pack is 700 bar (70 MPa)
■
e remote control unit has a start up "ON"and reverse button.
■
e system has extremely rapid advancement thanks to a special double piston technol-
■
ogy, characterised by a low-pressure advancement and a slow high-pressure advance-
ment.
e capacity of the battery-powered press is 1.15 l/min under low pressure and
■
0.15 l/min under high pressure.
Automatic conversion from low to high pressure takes place at approximately 90 bar
■
(9 MPa).
e machine has great reverse capacity for more rapid working cycles.
■
e return stroke of the working head is controlled by the software.
■
e motor is adjusted with PWM (soft start to save the transmission, motor and battery).
■
Control of the equipment is realised through a micro-controller.
■
Pressure control is performed by an electronic pressure sensor.
■
e charge of the power pack is kept constantly under control.
■
Management of technical assistance is performed with an electronic system.
■
e traceability of work cycles is ensured through automatic registration and saving in the
■
machine memory.
e data saved can be read and the software can be updated through a mini USB interface.
■
Additional LED indicators provide rapid information on the status of the machine.
■
e first service assistance must be performed after 2.500 cycles.
■
Integrated and intelligent electronic module with a large LCD display.
■
970.464.00.0(00)
25