Important; Unpacking Instructions; Product Overview; Specifications - Medline NeuroGym Manual

IMPORTANT

Read all instructions and
precautions prior to using the
Sit-to-Stand Trainer.

Unpacking Instructions

The Sit-to-Stand Trainer is shipped fully assembled on
a 4'x4'/10 cm x 10 cm skid. The unit comes with 1 regular
sling and 1 bariatric extender strap. Unlock the wheels
by flipping the wheel lock levers up and roll the
Sit-to-Stand Trainer off the skid. Remove the protective
wrapping. The sling(s) and bariatric extender are packed
inside the wrapping.

Product Overview

The NeuroGym® Sit-to-Stand Trainer uses a
counterweight mechanism to provide a safe and effective
way to strengthen weight-bearing muscles and increase
standing stability and endurance. Unlike other tools that
help people rise to, or maintain, a standing position; the
Sit-to-Stand Trainer provides a counterweight to help
the user to successfully initiate the motion of standing-
up. Through continued training and gradually reducing
the counterweight, the user can relearn the standing-up
skill. Equipped with a weight-stack and a locking pulley
system, the counterweight can be easily applied to the
Sit-to-Stand Trainer. In addition, the trainer is mounted
on wheels and can also be used to begin taking steps in
any direction.
Visit www.neurogymtech.com to access application
notes and training videos

Specifications

• 28" x 36" x 72" (46 cm x 91 cm x 183 cm)
• Weighs 260 lbs/118 kg
• Seat material is built with antimicrobial, zinc omadine
powder-industrial microbiostat.
• This product has antimicrobial properties built-in to
protect the product. This product does not protect
users or others against bacteria, viruses, germs or other
pathogenic organisms.

Benefits

• Encourages early weight bearing and active
mobilization at the hips and knees
• Improves standing balance and stability to significantly
improve transfer safety and ease
• Enhances rehabilitation without physical strain
to the therapist
• Actively assists the standing motion with support at the
knees, trunk and arms to promote early mobility
Weight Limit for the Sit-To-Stand Trainer
There is no weight limit for the Sit-to-Stand Trainer.
A user's ability to use the trainer is limited by girth, rather
than weight. All body shapes are different, however,
experience shows that the regular sling and extender
strap would be appropriate for patients weighing up to
275 lbs/125 kg, while the bariatric sling and extender
strap would be appropriate for patients weighing up to
620 lbs/281 kg. Use the chart below for measurements.
1-800-MEDLINE (633-5463) | medline.com 1