Troubleshooting; Product Maintenance - Altair AL-2781 Instrucciones

TROUBLESHOOTING:

All manuals and user guides at all-guides.com
SYMPTOM
Lights do not come on at
all
Lights stay on throughout
the day (or stay on late into
the day)
Fuse blows or circuit
breaker trips when light is
turned on

PRODUCT MAINTENANCE:

•
To clean the fixture, disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Wait a few minutes for the
fixture to cool down. Use a dry or slightly dampened clean cloth (use clean
water, never a solvent) to wipe the glass and surface of the fixture
•
Do not use any cleaners with chemicals, solvents or harsh abrasives. If
necessary, use a mild soap to clean off any dirt or stains.
THREE YEAR LIMITED WARRANTY

Altair Lighting
workmanship for three years from the original date of purchase by the consumer.
This warranty is limited to the counter replacement at the time of purchase, with
the original purchase receipt. Altair Lighting
damage of any kind, incidental or consequential damages of any kind, whether
based on warranty contract or negligence, and arising in connection with the
sale, use or repair of the product claimed to be defective. Some states do not
allow the exclusion or limitation of incidental or consequential damages so the
above limitation may not apply to you. This warranty gives you specific legal
rights and you may also have other rights, which vary from state to state.
Misuse, accident, improper installation or maintenance will also void the
warranty.
POSSIBLE CAUSE
Wall switch and/or circuit breaker is off.
Incorrect or loose wire connections.
Light from another light source, such as
a street light or another light fixture, is
shining onto the photocell.
Fixture may be installed in a shaded
area, such as under a porch or an eave,
and not enough light is shining onto
photocell during the daytime.
Crossed wires or power wire is
grounding out.
warrants this product to be free from defects in material and
Page 7
SOLUTION
Turn on wall switch and/or circuit
breaker.
Access outlet box and fix wire
connections.
Eliminate the light source or
move fixture to another location.
Relocate fixture to a well lit area.
Access outlet box and fix wire
connections.

will not be liable for the loss or