Elcometer 510 Manual Del Usuario página 20

R
15 SPARES AND ACCESSORIES (continued)
15.2 DOLLY CUTTERS
Standards or test methods will determine if the Inspector should cut /
score around the dolly prior to test to separate the test area from the rest
of the coating; information which should be recorded with the results.
The Elcometer 510 is supplied with a dolly cutter and handle
appropriate for the dolly size included in the kit. Spare / replacement
cutters are available to purchase using the sales part numbers below.
Description
Dolly Cutter
Dolly Cutter
Dolly Cutter
Dolly cutter handles must be ordered separately - a handle is not
supplied with the dolly cutter accessory.
Description
Dolly Cutter Handle
Dolly Cutter Handle
Dolly Cutter Arbor
15.3 DOLLY SKIRTS
Standard skirts are available for 10mm, 14.2mm and 20mm dollies as
well as 50mm dollies. Special skirts are also available for testing on
thin substrates to even out the load, as using a standard skirt on a thin
substrate may cause the substrate to bend or flex during test.
Description
Standard Skirt
Thin Substrate Skirt
Thin Substrate Skirt
Standard Skirt
Part Number
T999101420S
T9990014T
T9990020T
T9990050S
†
I/D: Inner Diameter
en-19
All manuals and user guides at all-guides.com
For Dolly Sizes (mm)
14.2mm
20mm
50mm
For Dolly Cutter
T9990014CT
T9990020CT
T9990050CT
For Dolly Sizes (mm)
10, 14.2 & 20mm
14.2mm
20mm
50mm
Integrated Support Ring Dimensions
†
I/D
30mm
16.3mm
21mm
52mm
‡
O/D: Outer Diameter
Part Number
T9990014CT
T9990020CT
T9990050CT
Part Number
T9991420H
T9991420H
T9990050H
Part Number
T999101420S
T9990014T
T9990020T
T9990050S
‡
O/D
40.4mm
40.4mm
40.4mm
72mm
www.elcometer.com