Tabla de contenido
Publicidad
re and hard fibre shall be put into the jar lid after being cut into
hard fibre shall be put into the jar lid after being cut into
ermuch materials in the juicer each time, therefore, the materials
USE
ch materials in the juicer each time, therefore, the materials
re and hard fibre shall be put into the jar lid after being cut into
hard fibre shall be put into the jar lid after being cut into
PLACEMENT
1.
Make sure the plug is not in the outlet and the on/off switch is turned off prior to assembling.
2.
Put the motor block onto a stable, level surface.
buffer plate well in position
r plate well in position
3.
Turn the bowl upside down and you will see a small rubber plate at the pulp outlet. Assemble the
am strainer is used for making ketchup only
m strainer is used for making ketchup only
buffer plate on the bottom of the bowl well in position in the pulp outlet.
hall be assembled well in the residue outlet after finish cleaning each
g frozen dish. Select the appropriate strainer based on your demand.
e assembled well in the residue outlet after finish cleaning each
rozen dish. Select the appropriate strainer based on your demand.
4.
Position the bowl on the motor block. Make sure the bowl is mounted properly on the axle of the
motor block and the residue outlet is placed well in position.
5.
Position the desired sieve in the bowl (the sieve with small mesh for juice, the sieve with large mesh
for jam or the sieve for frozen preparations, i.e. for deep-frozen bananas and/or blueberries that
have been sufficiently defrosted so that a fork can be inserted into their centre).
YOUR SLOW JUICER
R SLOW JUICER
6.
Push the squeezing screw firmly into the centre of the bowl, making sure that it clicks into position,
or else the cover will not close.
nwards and make sure that the residue outlet shall be placed well in
ds and make sure that the residue outlet shall be placed well in
7.
Position the cover on the bowl and make the symbol "
" on the bowl and then rotate the bowl lid clockwise until the symbol "
shall be assembled well in position properly otherwise the appliance will
e assembled well in position properly otherwise the appliance will
the symbol "
assembled well in position, otherwise the appliance will not operate.
des, before operating, please check the buffer plate and make sure that it
fore operating, please check the buffer plate and make sure that it
8.
Finally, put the food pusher into the lid.
d well in the residue outlet (See Fig.2).
9.
Position a measuring cup under the juice outlet and a measuring cup under the pulp outlet.
in the residue outlet (See Fig.2).
10. Open the juice outlet cover. The machine is now ready for use.
11.
Repeat these steps in reverse order when disassembling the machine.
3
emble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then
mble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then
he symbol "
" on the jar lid align with the symbol "
symbol "
" on the jar lid align with the symbol "
lid clockwise until the symbol " " on the jar lid aligns with the symbol "
d clockwise until the symbol " " on the jar lid aligns with the symbol "
e Fig.4).
After it, press the fastener inwards to lock the jar lid well in position. The
Fig.4).
After it, press the fastener inwards to lock the jar lid well in position. The
shall be assembled well in position properly otherwise the appliance will not operate.
all be assembled well in position properly otherwise the appliance will not operate.
making ketchup only
, put the food pusher into the jar lid.
e appropriate strainer based on your demand.
put the food pusher into the jar lid.
6
e strainer based on your demand and then put it into the jar. There are
ner based on your demand and then put it into the jar. There are
luding juice strainer, jam strainer and frozen dish strainer for your
g juice strainer, jam strainer and frozen dish strainer for your
, put the grinding head into the jar and ensure the grinding head is covered
he grinding head into the jar and ensure the grinding head is covered
of the motor unit (see Fig.3).
motor unit (see Fig.3).
e strainers including juice strainer, jam strainer and frozen dish strainer
ners including juice strainer, jam strainer and frozen dish strainer
nged with each other when operate. Juice strainer is used for extracting
34
Fig.3
DO9248J
e jar correctly. Firstly, put the jar lid downwards and then
juice,
jam strainer is used for making ketchup only
making frozen dish. Select the appropriate strainer based on your demand.
" on the bowl. Then press the fastener inwards to lock the lid. The lid has to be
Fig.3
Fig.3
3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and
make the symbol "
the jar lid clockwise until the symbol " " on the jar lid aligns with the symbol "
jar (See Fig.4).
jar lid shall be assembled well in position properly otherwise the appliance will n
while frozen dish strainer is used for
Finally, put the food pusher into the jar lid.
Fig.2
Fig.2
7
4. Place your juice container below the juice outlet and residue
container below the residue outlet (see Fig.5). Until now, the
Juicer is ready for operating.
Note: When need to remove the whole appliance, please grasp
the motor unit instead of the jar lid to remove it to avoid
accident.
USING YOUR JUICER
Fig.4
1. Before attaching the power cord into the outlet, make sure the
Fig.4
4) Do not put overmuch materials in the juicer each time
with less moisture and hard fibre shall be put into the jar
slices.
while frozen dish strainer is used for
while frozen dish strainer is used for
5) Do not put overmuch materials in the juicer each time
with less moisture and hard fibre shall be put into the jar
slices.
6) Assemble the buffer plate well in position
The buffer plate shall be assembled well in the residue outlet
time.
ASSEMBLE YOUR SLOW JUICER
1. Put the jar downwards and make sure that the residue outl
position. The jar shall be assembled well in position properly
juice,
not operate. Besides, before operating, please check the buff
making frozen dish. Select the appropriate strainer based
must be assembled well in the residue outlet (See Fig.2).
4
" on the jar lid align with the symbol "
" on the jar and then rotate
" on the jar and then rotate
After it, press the fastener inwards to lock the jar lid well in posit
2. Then select the strainer based on your demand and then p
3. Assemble the jar lid on the jar correctly. Firstly, put t
three strainers including juice strainer, jam strainer and froze
make the symbol "
selection. After it, put the grinding head into the jar and ensu
the jar lid clockwise until the symbol " " on the jar lid a
well into the axis of the motor unit (see Fig.3).
jar (See Fig.4).
NOTE: The three strainers including juice strainer, jam strai
jar lid shall be assembled well in position properly other
can not be exchanged with each other when operate. Juice st
Finally, put the food pusher into the jar lid.
while frozen dish strainer is u
" on the lid align with the symbol "
" on the lid aligns with
jam strainer is used for making ketchup only
5
Fig.3
"on the
"on the
8
9
" on the jar lid align with the symb
After it, press the fastener inwards to loc
6
6
Fig.4
whil
" on the jar and t
Fig.2
Fig.3
Fig.5
Publicidad
Tabla de contenido
