Search Method - One for All URC-7210 Guia Del Usuario

All manuals and user guides at all-guides.com

Search Method

If your device does not respond to the ONE FOR ALL after you have tried
all the codes listed for your brand, try searching for your code. The Search
Method allows you to find the code for your device by scanning through all
the codes contained in the memory of the ONE FOR ALL. The Search
Method may also work if your brand is not listed at all.
To search for your TV code:
1 Switch your television on (not on standby).
2 Press and hold the MAGIC key until the POWER key
(LED) blinks twice (the red light (LED) underneath the
POWER key will blink once then twice).
3 Press 9 9 1. The re d lig ht will blin k twice.
4 Next, press POWER.
5 Aim the ONE FOR ALL at your Television. Now press CH+
over and over, until your Television turns off (everytime
you press the CH+ key the ONE FOR ALL will send out a
POWER signal from the next code contained in the memo-
ry). You may have to press this key many times (up to 150
times) so please be patient. If you skip past a code, you
can go to the previous code(s) by pressing the CH- key.
Remember to keep pointing the ONE FOR ALL at your
Television while pressing this key.
6 As soon as your television turns off, press MAGIC to store
the code.
Important note:
- Most TV's do not switch on pressing the POWER key. Please try pressing a
"number" key or the "TV-text off" key to switch your TV back on.
Once you have Set-Up your ONE FOR ALL, you can blink back your
SET-UP CODE for future reference.
Example: To blink out your Television code:
1 Press and hold the MAGIC key until the POWER key
(LED) blinks twice (the red light (LED) underneath the
POWER key will blink once then twice).
2 Press 9 9 0. The re d lig ht will blin k twice.
3 For the first digit of your four-digit code, press 1 and
count all the red blinks. If there are no blinks, the digit is
"0".
4 For the second digit, press 2 and count all the red blinks.
If there are no blinks, the digit is "0".
5 For the third digit, press 3 and count all the red blinks.
If there are no blinks, the digit is "0".
6 For the fourth digit, press 4 and count
all the red blinks. If there are no blinks, the digit is "0".
Now you have your four-digit code.
WWW.ON EFORALL. COM
7