Installation Instructions - Stiebel Eltron CNS 50 Instrucciones De Utilización Y Montaje

As with all similar heaters, the flow of rising air
may cause discoloration of the wall.

2. Installation instructions

Attention!
The installation, electrical connection and first
operation of this appliance should be carried
out by a qualified installer.
The company does not accept liability for
failure of any goods supplied which have not
been installed and operated in accordance with
the manufacturer's instructions.
This convector heater must be installed by an
authorised serviceman in conjunction with these
instructions.
These installation instructions belong to the
heater and must be handed on to the successor
if the heater is sold.
Stiebel Eltron convector heaters are direct
electric heaters designed to be mounted on the
wall and are particularly suitable for heating
smaller rooms such as utility rooms, kitchen, bath-
and washrooms etc.
The convector heater is supplied with a lead.
The convector heater must not be mounted
immediately below a wall socket.
Type
Connecting power W
Breadth mm
Heigth mm
Depth mm
with wall mounting
Measure A
6
All manuals and user guides at all-guides.com
CNS CNS CNS
50 75 100
500 750 1000
370 370 440
450 450 450
80 80 80
100 100 100
121 121 195
Before using any materials which
produce flammable gases or vapours, e.
g. laying or sealing parquet or PVC flooring, or
when using spray polishes, spirits and similar
materials, ensure the heater is switched off.
1.4 Servicing
Do not use abrasive or aggressive cleansers to
clean the heater.
Use a vacuum cleaner regularly to clean the
upper and lower air grids.
for the professional
During the just operation, the heater may
give off a smell. Ensure that the room is
ventilated (for example, open a window).
2.1 Attaching the wall mounting
bracket
The wall mounting bracket is oriented centrally
(see figure and the following table).
Use the wall-mounting bracket as a template for
positioning the heater correctly and providing the
correct distance from the floor.
Place the bracket on the floor. Mark the screw-
holes through the drill holes (1).
Raise the bracket and position it in such a way
CNS CNS CNS
125 150 175
1250 1500 1750
520 590 665
450 450 450
80 80 80
100 100 100
269 343 417
CNS CNS
200 250
2000 2500
740 890
450 450
80 80
100 100
491 639