Adding Engine Oil - Honda PCX150 2020 Manual Del Propietário

Adding Engine Oil

If the engine oil is below or near the lower
level mark, add the recommended engine oil.
P. 75, P. 143
2 2
1.
Remove the oil fill cap/dipstick. Add the
recommended oil until it reaches the
upper level mark.
Place your scooter on its centre stand
u
on a firm, level surface when checking
the oil level.
Do not overfill above the upper level
u
mark.
Make sure no foreign objects enter the
u
oil filler opening.
Wipe up any spills immediately.
u
2.
Securely reinstall the oil fill cap/dipstick.
NOTICE
Overfilling with oil or operating with insufficient
oil can cause damage to your engine. Do not mix
different brands and grades of oil.
Engine Oil
For the recommended oil and oil selection
guidelines, see "Maintenance Fundamentals."
P. 75
2
Changing Engine Oil, Cleaning
Strainer Screen
Changing the oil and cleaning the strainer
screen requires special tools. We recommend
that you have your scooter serviced by your
dealer.
Change the engine oil with the Idling Stop
switch at IDLING.
1.
If the engine is cold, idle the engine for 3
to 5 minutes.
2.
Turn the ignition switch to the
position and wait for 2 to 3 minutes.
Adding Engine Oil
u
(Off)
89
Continued