CleanForce CF1400 Manual De Instrucciones página 5

ASSEMBLY AND OPERATING INSTRUCTIONS
3
Connect detergent suction tube to the tank.
Insert the tank into the recesses and push
forward until it locks in.
5
Attach high pressure hose to the spray gun
(hand tighten only).
7
Attach the garden hose to the water inlet(
hand tighten only).
7 English
4
Attach high pressure hose to the machine's
water outlet (hand tighten only)
6
Insert adjusta bl e wand to the gun and twist
¼ turn to lock in position.
8
2
1
Attach garden hose to water supply and
turn water valve on to the full on position.
ASSEMBLY AND OPERATING INSTRUCTIONS
9
OFF
Make sure the ON/OFF switch is in the
OFF position.
11
To allow air to escape from the hose, depress
the trigger on the gun until there is a steady
stream of water.
CAUTION
Drain unit after each use (for
storage): remove water
connection, turn ON the
machine for a few seconds
and press gun trigger to bleed
remaining water in the pump.
Turn OFF immediately.
10
Completely unwind power cord and plug the
GFCI into an outlet, ensure there are no other
items using this circuit. The GFCI plug light
will turn red if the outlet has power.
12
OFF(O)
ON(I)
Turn switch to ON position. Note: If no sound
is heard this is normal, follow the instruction
manual for proper operation.
English 8