Shutting Down And Cleaning Up; Taking A Break; Winterizing And Long-Term Storage - CleanForce CF1400 Manual De Instrucciones

ASSEMBLY AND OPERATING INSTRUCTIONS

TAKING A BREAK

If taking a break of five minutes or more:
1
Engage gun safety lock.
2
Turn unit to "OFF" (O) position.
3
Unplug the power cord from the outlet.

SHUTTING DOWN AND CLEANING UP

1
detergent bottle and rinse it thoroughly.
2
Turn the switch to "OFF" (0) position.
3
Unplug the power cord from the outlet.
4
Turn off the water supply.
5
Press trigger to release any remaining water pressure.
6
Disconnect the garden hose from the water inlet on the unit.
7
Engage gun safety lock.
WARNING
Turn off water supply and squeeze trigger to depressurize the unit. Failure to do so
could result in personal injury due to discharge of high-pressure water.
CAUTION
Failure to clean properly will cause the detergent injection system to become
clogged and inoperable.
CAUTION
Never use:
Bleach, chlorine products and other corrosive chemicals
Liquids containing solvents (i.e., paint thinners, gasoline, oils)
Tri-sodium phosphate products
Ammonia products
Acid-based products
These chemicals will harm the unit and will damage the surface being cleaned.
11 English

WINTERIZING AND LONG-TERM STORAGE

OPTIMUM WINTERIZING PROCEDURE
Winterizing your pressure washer will help protect and prolong its life. We strongly
recommend you follow the below steps using *
This will keep the internal parts lubricated, protected from rust, and prevents the pump
from freezing.
1
Connect Pressure Washer Pump Saver hose onto the water inlet.
2
Depress button on top of Pump Saver container.
3
4
Remove the hose from pump inlet ( water inlet).
*Pressure Washer Pump Saver not included
QUICK WINTERIZING PROCEDURE
If you cannot do the optimum winterizing procedure, you can still protect your pressure
washer from winter-damage by doing below:
1
Disconnect all water connections.
2
Turn on the machine for a few seconds, until the remaining water in the pump exits.
Turn off immediately.
3
Do not allow high-pressure hose to become kinked.
4
Store the machine and accessories in a room that does not reach freezing
temperatures. Do not store near furnace or other sources of heat as it may dry out
the pump seals.
CAUTION
Drain gun assembly of any remaining water. Aim gun downwards and squeeze trigger.
English 12