Tabla de contenido
Publicidad
HOW TO STOP THE UNIT
1.
Completely push the clutch/brake pedal forward to stop the
unit. Keep your foot on the pedal.
2.
Move the attachment clutch to the DISENGAGE position.
3.
Move the speed control lever to the NEUTRAL position.
4.
Set the parking brake.
HOW TO SET THE PARKING BRAKE
1.
Completely push the clutch/brake pedal forward.
2.
Lift the parking brake lever (Figure 5).
3.
Remove your foot from the clutch/brake pedal and then release
the parking brake lever. Make sure the parking brake will hold
the unit.
4.
To release the parking brake, completely push the clutch/
brake pedal forward. The parking brake will automatically re-
lease.
WARNING: Before you leave the operator's position,
move the shift lever to the neutral (N) position. Set the
parking brake. Move the attachment clutch to the
DISENGAGE position. Stop the engine and remove
the ignition key.
HOW TO USE
THE THROTTLE / CHOKE CONTROL
CAUTION: Always operate the engine with the throttle control
in the FAST position. If the engine runs for several minutes at
slower than the FAST position, the engine and transmission
will overheat and can be damaged.
Use the throttle/choke control to choke the engine for cold starts
and increase or decrease the speed of the engine (see Figure 6).
1.
Move the throttle/choke control completely forward to the
CHOKE position to start a cold engine.
2.
The FAST position is marked with a detent. For normal opera-
tion and when using a grass bagger, move the throttle control
to the FAST position. For maximum charging of the battery and
for a cooler running engine, operate the engine in the FAST
position.
3.
For transport and to tow pull behind attachments, control the
ground speed with the speed control pedal.
400150
All manuals and user guides at all-guides.com
OPERATION
5.
6.
CAUTION: To stop the engine, do not move the choke control
to CHOKE position. Backfire or engine damage can occur.
Clutch/Brake
4.
12
WARNING: Make sure the parking brake will hold the
unit.
Move the throttle control to the SLOW position.
To stop the engine, turn the ignition key to the STOP
tion. Remove the key.
Pedal
Parking Brake
The engine governor is set at the factory for maximum perfor-
mance. Do not adjust the governor to increase the speed of the
engine.
Figure 5
Throttle
Control
Figure 6
posi-
Publicidad
Capítulos
Tabla de contenido
