Bartscher E 7110 Manual De Instrucciones página 58

Navigation between the stored programs
D 4
T 11
54
All manuals and user guides at all-guides.com
To select a stored program, use
and select the desired program number by
turning
Confirm the selection by pressing
T 1
when the desired program „PRG 04" is
displayed.
When
this coking/baking phase may be displayed.
Set position 1 of the phase ("STEP 1") and
press
The cooking process can be also started with
any phase after phase 1 by selecting the
number of the desired phase and pressing
to start the oven.
In this case, the oven will not pre-heat, even if
it is included in the program.
Changing/deleting a cooking/baking
program
To introduce changes to a saved programme,
select the number of the desired programme
(see "Selecting saved programmes"). Next,
T 12
choose the cooking phase to be changed and
programme the cooking phase as desired.
After finishing, the changed programme can
be saved by pressing and holding button
T 16
12
for several seconds, until LED display
reads "MEM".
Part or all of a given program can also be
deleted.
In order to delete a particular cooking phase
M
from a defined program, set the program
information to the phase you wish to delete,
then press and hold button
seconds until the LED
M
dial clock or counter-clockwise.
T 11
button is flashing the settings of
T 16
to start the program.
D 4
reads "dEL?N".
T 12
button
T 12
button
T16
T
D 4
T 11
for several