Basic Cleaning - SOLAC CE4481 Instrucciones De Uso

Ocultar thumbs Ver también para CE4481:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
ENGLISH
Unplug the appliance to the mains.
Remove the water from the water tank.
Clean the appliance
CLEANING
A. BASIC CLEANING
Disconnect the appliance from the mains and
let it cool before undertaking any cleaning task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
Neither parts of this appliance are suitable for
cleaning in the dishwasher.
After washing, dry all the parts before fitting
them together and storing.
B. CLEANING THE FROTHING WAND
CAUTION! The frothing wand, frothing tip, and
frothing sleeve may be VERY HOT
It is recommended to purge and wipe the froth-
ing wand after steaming milk to prevent depos-
its of dirt and before turning off the machine
To do this, pull the black frothing sleeve down
Fill a cup with a bit of water, immerse the froth-
ing wand into the water
Drain hot water through the pipe, following the
instructions "Getting hot water"
Use a cloth to dry the frothing wand and re-
place the frothing sleeve
In case no steam comes out of the frothing
wand, hardened milk blocks its path.
Carefully use a needle to loosen the milk resi-
due from the opening of the frothing tube
to remove any blockage,
Once clean, rinse with running water from the
tap and reassemble it. Then steam again
HOW TO DEAL WITH LIME SCALE INCRUS-
TATIONS:
For the appliance to work correctly it should be
kept free of lime scale or magnesium incrusta-
tions caused by the use of hard water.
To prevent this kind of problem, we recom-
mend the use of water with low lime or magne-
sium mineralisation.
However, if it is not possible to use the kind of
water recommended above, you should peri-
odically remove the lime scale from the appli-
ance:
Every 6 weeks if the water is "very hard".
Every 12 weeks if the water is "hard".
o do so, we recommend the use of a specific
product Taurus Decal for this kind of product
which can be found in specialised shops and
authorised technical services.
Homemade solutions are not recommended in
the descaling of this appliance, such as the use
of vinegar.
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido