SOLAC CE4481 Instrucciones De Uso página 9

Replace the tank in its housing, ensuring that
•
it is well fitted.
FILLING OF COFFEE:
Remove the filter holder.
•
Position the ground chosen coffee filter ((L ó
•
M) in the filter holder
We recommend using natural toast coffee, as
•
using roasted coffee may affect the operation
of the machine.
Fill the removable filter with ground coffee (6-7
•
g per cup to be prepared).
If you wish to make 1 coffee, use 1 filter coffee
•
and, fill the ladle (1 spoonful) and take the ca-
pacity of the measuring spoon as the measure
for one coffee until half its capacity.
For 2 coffees, use 2 cups filter (M), and put in
•
2 spoonfuls.
Next lightly press down the ground coffee with
•
the back of the spoon.
Fit the filter holder in the appliance once more.
•
Position the filter holder in the coffee assem-
•
bly by inserting the assembly downwards and
turning it from left to right until it locks.
USE
Before connecting the machine, check that
•
the buttons (F, G) are not pressed, and steam
control (R) is closed
Connect the appliance to the mains.
•
Turn the appliance on using the on/off switch
•
(F)
The (D) pilot light comes on.
•
Wait until the pilot light (E) is lighting. It means
•
right temperature is reached
Place one or two preheated cups at the filter
•
holder outlet.
Press the coffee switch (G) to the ON position
•
The coffee infusion will begin to exit. When you
have obtained the desired quantity of espres-
so coffee (short or long), come back switch to
OFF position
Once serving has finished, wait a few seconds
•
and remove the cups with the coffee.
Remove the filter holder and empty the
•
grounds from it.
Wash the filter holder with running water and
•
dry it well.
Check that the removable filter is perfectly fit-
•
ted into the filter holder.
Fit the filter holder in the appliance once more.
•
GETTING HOT WATER:
Put the device in ON situation, pressing the
•
knob ON/OFF (F)
The Heating indicator light (D) will illuminate
•
indicating that the water is heating up.
Wait Until the pilot light (E) is also highlight-
•
ed. This situation indicates that the water has
reached the right temperature.
Place A container under the nozzle.
•
Open The steam control (R), turning him to the
•
left, counterclockwise
Press The button coffee /water outlet (G)
•
The Hot water began to come out of the va-
•
porizer.
Once obtained the desired amount of hot wa-
•
ter, press the coffee outlet button (G) again,
which stops the pump
Close The turning knob (R) to the right, clock-
•
wise
OBTAINING STEAM:
The steam is used to foam milk for cappuccino,
•
and also to heat other liquids.
Turn the appliance on using the on/off switch.
•
Wait until the pilot light (G) has gone out which
•
will indicate that the appliance has reached an
adequate temperature for making coffee
For Steam, press the Steam heating button (H)
•
and continue heating until the steam tempera-
ture has been reached.
The warning light (E) will illuminate indicating
•
that the water has reached the necessary tem-
perature for generating steam.
Place a recipient under the steam tube.
•
Open Steam knob (R) anticlockwise
•
Steam only will begin to exit.
•
When you have enough, close the control and
•
remove the recipient.
AUTOOFF FEATURE:
The SOLAC machines are designed to save
•
energy
To that end, after some minutes from the last
•
operation, the unit switches to energy saving
mode
To return to normal operation you should just
•
Switch OFF and Switch ON the connect button
(F)
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Turn the appliance off, using the on/off switch
•
(F) to OFF
EN