Cooke & Lewis CLFLEX2Z30 Manual Del Usuario página 28

28
Use
Once the time is set, the display shows the remaining time.
The timer indicator for the chosen cooking zone will flash
for five seconds and then stay lit.
When the set time has completed, the display will show "00",
the buzzer will sound and the cooking zone will be switched
off automatically.
WARNING: This will not affect any other cooking zones already in use - they will stay on.
IMPORTANT: The illuminated dot next to the power level indicator indicates if a timer has been
activated.
Set up for multiple zones
Set up for extra zones are the same as above.
Note that the display will only show the shortest time
remaining across all zones.
For example, if power level 3 is set at 15 minutes, and power
level 6 is set at 45 minutes, 15 will show in the display.
The indicator next to the power level 3 with the shortest
time will flash.
When the 15 minutes has expired and that zone has been
turned off, the display will now switch to the next zone and
show the new remaining time, in this case 30 minutes.
You can check remaining time in each zone by touching the relevant Cooking zone selector.