Bartscher 18GN110 Manual De Instrucciones Originales página 11

Assembly
1. First, install 6 cross members (upper,
2. Connect 6 cross members with another
Fig. 1
3. Place the clearing trolley on its side and
Fig. 2
4. Place the clearing trolley on the castors and check
its stability.
5. Clearing trolley may be levelled with use of castors
by screwing or unscrewing them (fig. 3).
6. After placing the clearing trolley in required place
lock 2 castors with stoppers to prevent the
incidental relocation or falling down.
Fig. 3
lower and middle) to one side part of
the clearing trolley (fig. 1).
Place a square washer between the
upper cross member and side part,
lower cross member and side part, and
between the side part and each bolt,
and tighten those elements with use of
an Allen wrench.
With the middle cross members, place
a square washer only between the
side part and bolt, and tighten those
elements with use of an Allen wrench.
side part with use of washers and bolts
as above.
attach the buffers for castors to the side
parts. Finally, screw the castors into the
side parts.
- 7 -