Product Identification - Holmatro BCU 05 A Serie Manual

• Use only genuine Holmatro accessories and ensure that they have been attached correctly.
• Make sure that parts of the body never come between moving parts. There is a risk that parts of the
body may be crushed or cut.
• Make sure that the deadman's handle does not become jammed.
• Stop immediately if the system makes strange noises or displays aberrant behaviour.
• Stop immediately if the equipment leaks oil. Oil escaping under pressure can penetrate the skin and
cause serious injury. Go immediately to a hospital with a person who is injected with oil for medical
help. Give a specification of the oil to the medical staff.
• Return inactive equipment immediately to the tool station.
• Always adhere to the safety regulations that apply to other equipment that is used in the operation.
2.11 Safety regulations with respect to maintenance
• Wear personal means of protection when performing maintenance tasks.
• Never work in a way that could jeopardize safety.
• Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
• Make sure that moving parts do not move unexpectedly.
• Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in an environmentally responsible way.
3 Description
3.1 Equipment
The cutter can be used independently because of the battery-driven hydraulic system.
The tools are produced as hand tools that can be operated by one person.
The tools are suitable for cutting metal and synthetic material.
The high hydraulic pressure that is used means these tools can apply enormous forces.
3.2 Type designation
Example: BCU 10 A 20
/i
Digit Example
1-3 BCU
4-5 10
6 A
7-8 20
3.3

Product identification

Refer to Fig. 2.
BCU * A *
All manuals and user guides at all-guides.com
Description
B = Battery
CU = Cutter
Type indication
A = Aluminium body
Blade choice, refer to Fig. 4.
916.400.018_003
EN
35