Craftsman 919.155190 Manual Del Usuario página 7

All manuals and user guides at all-guides.com
To Convert to Remote Pressure
Feed
If the material to be sprayed is too
heavy for siphon feed or higher
volume application is desired, convert
to the pressure feed set up.
1. Remove the material cup from
lid/gun assembly. NOTE: Slide
release lever to the right, rotate
lid, and remove material cup.
2. Slide yoke, with built in socket
feature, over nut. Grip the yoke
and turn to loosen nut, after the
nut is loosened hand turn until lid
assembly can be removed from
gun.
Typical Pressure Feed Set Up
Air Hose
3.
4.
NOTE: When replacing lid assembly to
gun assembly hand tighten nut and
then slide yoke over nut to tighten
securely.
Yoke
Regulator
Paint Tank
7- ENG
The gun is now ready to be
connected to any pressure feed
tank with a standard 3/8" straight
pipe female connection. See
paint tank manufacturer's manual
for correct procedure.
See "Operation" Section to learn
how to use the spray gun.
Oil/Water
Extractor
Fluid Hose
Yoke
To Air
Supply
D29783