Cleaning And Disinfecting Instruction - Gima OXY-100 Manual De Uso Y Mantenimiento

35
8 Repair and Maintenance
8.1 Maintenance
The expected service life(not a warranty) of this device is 5 years. In order to
ensure its long service life, please pay attention to the maintenance;
- Please change the batteries when the low-voltage indicator appears.
- Please take out the batteries if the oximeter will not be used for a long time.
- The recommended storage environment of the device:
Ambient temperature: -20ºC ~60ºC
Relative humidity 10%~95%
Atmospheric pressure: 50kPa~107.4kPa
- The oximeter is calibrated in the factory before sale, there is no need to
calibrate it during its life cycle. However, if it is necessary to verify its accuracy
routinely, the user can do the verification by means of SpO
be done by the local third party test house.

8.2 Cleaning and Disinfecting Instruction

- Surface-clean sensor with a soft cloth by wetting with a solution such as 75%
isopropyl alcohol, if low-level disinfection is required, use a 1:10 bleach solution.
- Then surface-clean by a dampened cloth and let it air dry or wipe it with a cloth.
High-pressure disinfection cannot be used on the device.
Do not immerse the device in liquid.
Disposal: The product must not be disposed of along with other
domestic waste. The users must dispose of this equipment by
bringing it to a specific recycling point for electric and electronic
equipment.
For further information on recycling points contact the local
authorities, the local recycling center or the shop where the product
was purchased. If the equipment is not disposed of correctly,
fines or penalties may be applied in accordance with the national
legislation and regulations.
GIMA WARRANTY CONDITIONS
Congratulations for purchasing a GIMA product.
This product meets high qualitative standards both as regards the material
and the production. The warranty is valid for 12 months from the date of
supply of GIMA.
ENGLISH
simulator, or it can
2