Temperature Units; Smart Diagnosis; Program Update; Demo Mode - LG WSES4728F Manual Del Propietário

the thermostat 20 (12
until the oven is adjusted to your satisfaction.
Adjusting the Thermostat
1
Touch Settings at the center bottom of the
Main screen, swipe to the third Settings
screen, and touch Temperature Adjustment.
2
To make large adjustments, drag the central
indicator toward the
or tap a location on the scale. To make small
adjustments, tap ~
thermostat in 1-degree increments. Tap and
hold or to scroll up or down the scale.
~ !
3
When the desired change appears above the
range, touch OK.

Temperature Units

Set the oven temperature display to show either
Fahrenheit or Celsius units.
The oven defaults to Fahrenheit unless changed by
the user.
Setting Temperature Units
1
Touch Settings at the center bottom of the
Main screen, swipe to the third Settings
screen, and touch Temperature Units.
2
Select or .
3
Touch OK.

Smart Diagnosis™

TM
Smart Diagnosis can be run through a
smartphone application or by calling for support.
Place your smartphone's mouthpiece near the top
left corner of the screen. See "Smart Diagnosis
Function" in the Smart Functions section for
detailed instructions.
). Proceed in this way
or ends of the scale
~ !
or ! to raise or lower the
1
Touch Settings at the center bottom of the
Main screen, swipe to the third Settings
screen, and touch Smart Diagnosis.
2
Touch START to start the diagnostic tone.

Program Update

Once the appliance is connected to a home Wi-Fi
network, use this setting to check for available
programming updates and install them.
1
Touch Settings at the center bottom of the
Main screen, swipe to the third Settings
screen, and touch Program Update.
2
The display shows available programming
updates. Touch UPDATE to download and
install the new version.

Demo Mode

Demo Mode for showroom use only. The oven will
not heat up.
1
Touch Settings at the center bottom of the
Main screen, swipe to the third Settings
screen, and touch Demo Mode.
2
Select either the ON or OFF mode.
3
Touch OK.
DEMO
NOTE
• When Demo Mode is on, the appliance will not
heat up.
• The oven Demo Mode icon appears in the
display if the Demo Mode is on.

Factory Data Reset

This function returns all settings to the factory
defaults.
OPERATION 15
06:21
AM